What Does RAID 3 Mean?
RAID 3 is a Redundant Array of Independent Disks (RAID) standard that uses striping at the byte level and stores dedicated parity bits on a separate disk drive. Like RAID 2, RAID 3 requires a special controller that allows for the synchronized spinning of all disks. Instead of striping data blocks into different disks, RAID 3 stripes the bits, which are stored on different disk drives. This configuration is used less commonly than other RAID levels.
Techopedia Explains RAID 3
Because RAID 3 combines parity and striping with stored parity bits on a dedicated disk, this configuration requires at least three separate hard disks - two for striping data and one for storing parity bits. The disks must spin in sync, so sequential read/write (R/W) operations achieve good performance. However, random R/W operations may take heavy hits in performance.
In actual terms, read speed is much greater than write speeds because of required checksum calculations, which is a performance bottleneck for the entire disk array.
RAID 3 advantages include:
- High throughput for transferring large amounts of data
- Resistant to disk failure and breakdown, which leads to RAID 3's main disadvantages (below).
- The configuration may be too much if a small file transfer is the only requirement.
- Disk failures may significantly decrease throughput.