Subnetwork Access Protocol (SNAP)
Techopedia Explains Subnetwork Access Protocol (SNAP)A SNAP header follows the LLC header and also includes an organization code, which indicates that the following 16 bits designate the Ether Type code. Typically, every communication is carried out by means of 802.2 type 1 communication. Compatible systems on similar IEEE 802 networks can make use of 802.2 type 2 communication after validating that it is assisted by both nodes. This can be done by means of the 802.2 XID mechanism. Even so, type 1 communication is the preferred method, and must be backed up by the entire implementation.
The mapping of 32-bit Internet addresses to 48-bit or 16-bit IEEE 802 addresses is accomplished through the dynamic discovery method of Address Resolution Protocol (ARP). IEEE 802 networks can have 48-bit or 16-bit physical addresses. The SNAP enables the effective use of either address size inside a specific IEEE 802 network.
The LLC header is three octets long, while the SNAP header is five octets long. So, a combination of LLC and SNAP headers is overall eight octets long. On Ethernet, this minimizes the available payload size for protocols.
- 4 Common Machine Learning Pitfalls and How To Avoid Them
- Single-Tenant vs. Multi-Tenant Applications: How to Choose
- Multimodal Learning: A New Frontier in Artificial Intelligence
- Uncovering Security Breaches
- 10 Big Data Do's and Don'ts
- Can the Blockchain Be Hacked?